billiardsStop billiards"Gace" means when hitting the ballStop billiards, hit the ballStop billiardsbeyond the center of theStop billiards, resulting in a specific rotation of the ball. The following is a detailed explanation of the billiard jam. When hitting the cue ball at the hitting point, in addition to the center point, there are also eight points in the direction of straight up, straight down, left, left, lower right, lower right. When the hitting point deviates from the vertical line at the center of the cue ball, it is called the "jam" influencing factor. The position of the hitting point, the strength of the force, the angle between the club and the cue ball.
The role of billiards jam is mainly reflected in the control of the direction of travel of the cue ball. Specifically, by changing the contact point between the club head and the cue ball when hitting the ball, and combining different hitting forces, the direction and distance of travel of the cue ball after hitting the target ball can be more accurately controlled. The direction and distance of the cue ball after hitting the target ball affect the direction of the target ball. Under the case of a heavier jam, the force and angle of the stick will not only affect the movement of the cue ball, but also have an understanding of the direction of the target ball.
In billiards,"gassing" comes from the English word "Side", which means that when hitting the cue ball, the contact point of the club deviates from the center of the cue ball, thus giving the ball a specific rotation. When hitting the cue ball, there are nine points in the center, right, right. Among them, the latter six shooting methods all involve "gassing", that is, the contact point of the club deviates from the vertical line "gassing" at the center of the cue ball.
The rules of billiards jam mainly include the influence of the following points on the position of the hitting point. When billiards hit the cue ball, there are nine points in nine directions. Among them, the contact point of the club in the last six hitting methods deviates from the vertical line of the center of the cue ball. These hitting methods are collectively referred to as "jam". The strength and angle of the jam, the strength of the hitting point, the angle between the club and the cue ball will have a significant impact on the movement of the cue ball after hitting the ball. The greater the force, the influence on the cue ball.
The rule of billiards jam is mainly reflected in the hitting point position, the angle between the club and the cue ball, and the influence of club head friction on the movement of the cue ball. The following is a specific rule analysis of the hitting point position. The position of the hitting point is offset from the vertical line of the center of the cue ball, including different hitting point positions in six directions: left, lower, right, lower, which will cause the cue ball to produce different rotation and deviation force after hitting the target ball.
The rules of billiards jam are mainly reflected in the hitting point position, the angle between the club and the cue ball, and the influence of the friction force of the club head on the movement of the cue ball. The following are the specific rules. When the hitting point position is jammed, the club's touch point deviates from the vertical line of the center of the cue ball. For example, different hitting points such as left, right, left, lower, upper, right, lower, etc. will cause the cue ball to produce different rotations and deviation from the direction after hitting the target ball.
The "gagging" in billiards means that when the ball is shot out, the club head does not hit the front center point of the cue ball, but hits any point on a concentric circle with any radius centered on the front center point of the cue ball, thereby causing a specific rotation of the ball. Specifically, the selection of the hitting point is not the front center of the cue ball, but a position deviated from this center point. Such a hitting method will cause the cue ball to have a gagging effect.
The main function of billiards jam is to control the direction of travel of the cue ball and facilitate the movement of the cue ball. Specifically, when controlling the direction of travel and jam, the position where the club hits the cue ball is not the front center point, but any point on concentric circles with the front center point of the cue ball as the center. This hitting method allows the cue ball to deflect in the direction determined by the hitting position after hitting the target ball, thereby realizing the control of the direction of travel of the cue ball and influencing the cue ball.
The main function of billiards jam is to control the direction of travel and position of the cue ball. Specifically, when the direction of the cue ball is jammed, the position where the club hits the cue ball is not in the center of the face, but at any point away from the center. This can make the cue ball rotate after hitting the target ball, thereby changing its direction of travel and affecting the movement of the cue ball combined with the power of the shot. The jam can more accurately control the rebound angle and distance of the cue ball after impact. This is important for the tactical layout and continuous offense in billiards games.
Then adding the right plug is a positive plug, and adding the left plug is a negative plug. The second classification is based on the change in the deviation angle after the cue ball hits the library. If the original deviation angle increases after the cue ball hits the library, it is a positive plug. If the original deviation angle is reduced, it is a negative plug. Mastering the stopping skills is crucial for billiards fans because it canStop billiardsThey provide more options for controlling the movement and rotation of the ball, thereby improving batting accuracy and providing a competitive advantage in the game.
In Yuan Cheng's demonstration, the seemingly simple turning of the backhand to adjust the aiming, it actually contains certain skills to give in. If you want to add the backhand in billiards, you need not only precise distance angle and strength control, but also a deep understanding of the amount of the jam. In fact, no club can ensure that the backhand can perfectly match the amount of the jam every time, because even in the same situation.
In order to skillfully hit the ball, the meaning of "jam" means that when the club hits the cue ball, the contact point between the club head and the ball is not the front center point of the cue ball, but the contact point of the club head with any radius centered on the center point of the cue ball. When playing billiards, there are nine points in the center of the cue ball, the center, the center, the right, the center, the left, the left, the right, and the last six hitting methods are equal.
The schematic principle of the cue ball movement in billiards is as follows. Let's first talk about how to realize the jam movement. There are only left and right plugs. The choice of left plugs and right plugs generally requires judging the use of left plugs and right plugs based on actual conditions. Attention should be paid to that, that is, the directions of the low pole and the high pole are opposite. The right plug for the high pole is to the right, and the right plug for the low pole is to the left cue ball after eating the bank. And so on, the left and right plugs of the middle pole are consistent with the direction of the high pole. Generally speaking, the high pole.
The main function of billiards is to control the direction of travel and position of the cue ball. Specifically, when controlling the direction of the cue ball, the position where the club hits the cue ball is not the center of the front, but any position deviated from the center point. This can cause the cue ball to spin after hitting the target ball, thereby changing its direction of travel and affecting the cue ball's position. By adjusting the position and strength of the jam and the angle between the club and the cue ball, the cue ball can be more accurately controlled after hitting.
Combination skills that help move and break the ball are often used in combination with low shots to form a combination skill. In practical application, the hitting point and strength need to be reasonably adjusted according to actual conditions. In short, low shots and break are important in billiards. Batting skills require precise control and skilled operation. Beginners should pay attention to the standardization of basic movements, and through continuous practice and practical experience accumulation, gradually master the timing and methods of applying these skills.
还没有评论，来说两句吧...